Home Page
Automatic Fastening Equipment
Automatic Fastening Machine Tooling
ITC C-Series
ITC CC-Series
ITC CNC-Series
ITC K-Series
"Knee" Riveter
ITC M-Series
ITC M-60-Series
ITC N-Series
Nutplate Machine
ITC Leading Edge
Fastening Machine
Electric Riveting System
"AFS" Fastener Feed Systems
Rebuild Capability
Tatco Compression Riveters
Tatco Hot Dimpler Machines
Tatco Shrinker / Stretcher Machines
Tatco Hand Rivet Squeezers
Portable Power Tool Sales & Service
Contact Us

Tatco Online Store

ITC C-Series Drill & Rivet Installation Machine

ITC C-Series Drill & Rivet Installation Machine

Model ITC-C-Series Drill & Rivet Installation Machine

This automatic machine was designed and built by ITC Aerospace Division to install fasteners in a variety of aircraft components. The machine automatically clamps the part, drills and countersinks the hole, applies sealant to the hole, and installs and upsets the fastener.

The machine can be ordered in a two-position head or a three-position head if sealant dispensing is needed. Throat depths from 48 inches up to 120 inches are available and upset forces from 12,000 to 20,000 pounds can be provided. The servo controlled drill spindle can be driven by either an electric or a hydraulic motor.

Standard Features

Programmable Logic Controller

Upset Force 16,000 Pounds

60 Inch Throat Depth

Capable of Drilling Aluminum, Stainless Steel, and Titanium Alloys

G400 Tooling Capability/Bayonet Mount

Maximum Cycle Time Clamp to Unclamp

Machine Cycle Counter and Timer, Key Lock Reset able

Set Up, Tool Change, Run, and Lockbolt Modes

Missing Rivet and Broken Drill Detector

Force Air Chip & Debris Removal System

Drill Spindle Accept Acura Flex Collets

Three Position Head (Drill/Countersink, Sealant, Rivet)

Capable of Installing Universal, Flush Head, and Modified Universal Head Rivets

Countersink Adjustment Range 0 to .50 Inches

Drill Speed Adjustable from 500 to 6000 RPM/Volvo Drill Motor

Variable Drill Feed Adjustable from 2 to 96 IPM

Adjustable Clamp Force from 100 to 750 Pounds

Countersink Selection in 0.0005 Increments

Maximum Stack Thickness .750 Inches/Drill only 1.00 inches

Work Height Approximately 67.00 Inches


6.00 Inches Daylight Opening with 10.00 inch Lower Tool

2-1/2 Deep Pocket

Fiber Optic Spot Locator

Automatic Vibratory Bowl Feed System Capable of Expanding to 20 Bowls and Feeding up to four (4) Machines

Automatic Rivet Clear System

Remote Powered Countersink Adjustment

NAS 1080 Lockbolt Collar Feeding and Installation Capability

Retractable and Resilient Pressure Foot Bushing

Automatic Stack Thickness Sensing with Accuracy of +/- .005 inches and Digital Display

Upper and Lower TV Camera with Sharp Multi Media Monitors/Cross Hair Generator/Ring Generator

Vortex Chiller with Pulse Timer

Two Speed Lower Ram/Lower Speed activated in Lockbolt select Mode

Sliding Transparent Covers for AFS System, with Key Locks

Manual Drop Feed Station

Soft-touch Operators Station/With Help Feature Mounted on a Multi-Link Moveable Arm

For more information, contact:

Herb Cupp
Director Sales / Service


Copyright © 2010 Townend Aerospace Tool Company, Inc.